Plastic Injection Clear Housing
The transparency of the plastic injection transparent shell matrix resin itself has a great influence on the transparency of PP plastic products. In order to improve PP transparency, a small amount of polyacrylate resin with good transparency and compatibility can be added.
Plastic Injection Clear Housing,Injection Molded Transparent Shell,Injection Molded Transparent Shell Proofing,Transparent Plastic Housing,Clear Plastic Housing Timeplex Industrial Limited , https://www.catimeplexhk.com
The test verified that the main power index of the car meets the design requirements, and the maximum speed, maximum traction, climbing ability, ramp starting ability, and electric braking capacity fully exceed the DC model of the same diesel engine configuration, reaching or close to the international advanced analog products. Technical indicators have been recognized by OEMs and mines. 
(1) the inorganic nucleating agent mainly consists of ultra-fine talc powder and SiO2, and also includes calcium carbonate, mica powder, inorganic pigments and fillers, etc., which is cheap in price and rich in source, but has certain influence on the gloss and transparency of the products.
(2) organic nucleating agent organic nucleating agent is a kind of organics with low relative molecular weight, represented by sorbitol and its derivatives. It has good compatibility with matrix resin and can significantly improve product transparency and surface gloss.
(3) in the case of sorbitol, when the amount of nucleating agent exceeds 0.3%, the effect of transparency improvement is not obvious, and even decreases. However, when the dosage is less than 0.2%, the nucleation quantity is insufficient and the transparency is not increased enough. It can be seen that the amount of nucleating agent should be between 0.2-0.3%. Therefore, suitable nucleating agent content can better improve the transparency of PP.
712 first successful 108t electric wheel dump truck test
Recently, the first 108t AC drive electric wheel dump truck with complete independent intellectual property rights provided by CSIC Heavy Industries 712 has completed the industrial operation test in Baotou Steel Group.