Drilling Unit Processing Notes:
It will realize continuous processing, improve efficiency and save time.
QUALITY MAKE BRAND, HONESTY WIN MARKET!
INNOVATION PROMOTE DEVELOPMENT, HARMONY
CONVERGE TALENTS.
CNC Sheet Metal Drilling Machine
Applicable Industry:
CNC Sheet Metal Drilling Machine is used for drilling connection boards and base plates of steel structure, tower, bridge and other industries.
Product feature:
1. CNC slider and drilling unit head, can control depth of holes, with function of drilling blind hole, reaming, chamfer angle.
2. Can automatically find holes to drill at X.Y axis.
3. Four processing position, 12 rapid hydraulic clamps, capable of clamping four sets of work pieces, and downloading work pieces when drilling simultaneously.
4. CNC, PLC systems, CRT display.
5. Programming software based on WINDOWS platform with CAD connection, fast and convenient programming, and visual previewing.
6. Automatic chip removal, coolant circulation cooling.
7. Key machinery, hydraulic pressure, electric components are chose from famous cooperation domestic and abroad.
8. Optimized integration design for complete machine, no foundation requirements.
Our Service
Flange Drilling Machine,Vertical Drilling Machine,CNC Punching And Drilling Machine,Flange Drilling Milling Machine Jinan Sunrise CNC Machine Co., Ltd , http://www.scmcnc.com
Automatic flake ice machine adopts the latest vertical evaporator with inner helix ice cutter. In the process of ice making, the water distribution device in ice maker sprays water even on the internal surface of ice maker to frozen in a short time. After ice formed, the helix ice cutter drops down and cut ice. In this method, it makes a full use of evaporator and increase the efficiency of ice making.
High quality, dry and non-caked
The thickness of flake ice which produced by automatic plate ice machine with vertical evaporator is about 1mm to 2mm. The ice shape is irregular flake ice and it has good mobility..
Simple structure and small land area
The series of ice flat has different kinds including fresh water type, seawater type, fixed cold source type, equip cold source by customer, and ice flat machine with cold room. And the daily capacity is ranges from 200kg to 60000kg. Customers can choose suitable machine according to site and different water quality. Compared to traditional ice making machine, it has advantage of small land area and low operation cost (no man for ice harvest)..
Parameters:
Ice output:10000kg/24hrs
Compressor:Germany Bitzer(two sets in parallel)
Ice machine size:2530*1830*1820mm
G.W.:1540kg
Standard power supply:3P/380V 50HZ
Total power:45.5 KW
Refrigerating capacity:65 KW
Refrigerant:R404A
Cooling type:Air coog
NOTE:
Ice storage room is optional according to customers' request with extra price.
Standard cooling type:water cooling(Equipped with water tower);Other brand compressor is available for choice with different price:Taiwan Hanbell/Fusheng screw compressor(more economical);Germany Blogs piston compressor    
Â
Higher refrigeration efficiency and lower loss of refrigeration capacity
Automatic flake ice machine adopts the latest vertical evaporator with inner helix ice cutter. In the process of ice making, the water distribution device in ice maker sprays water even on the internal surface of ice maker to frozen in a short time. After ice formed, the helix ice cutter drops down and cut ice. In this method, it makes a full use of evaporator and increase the efficiency of ice making.
High quality, dry and non-caked
The thickness of flake ice which produced by automatic plate ice machine with vertical evaporator is about 1mm to 2mm. The ice shape is irregular flake ice and it has good mobility..
Simple structure and small land area
The series of ice flat has different kinds including fresh water type, seawater type, fixed cold source type, equip cold source by customer, and ice flat machine with cold room. And the daily capacity is ranges from 200kg to 60000kg. Customers can choose suitable machine according to site and different water quality. Compared to traditional ice making machine, it has advantage of small land area and low operation cost (no man for ice harvest)..
Parameters:
Ice output:10000kg/24hrs
Compressor:Germany Bitzer(two sets in parallel)
Ice machine size:2530*1830*1820mm
G.W.:1540kg
Standard power supply:3P/380V 50HZ
Total power:45.5 KW
Refrigerating capacity:65 KW
Refrigerant:R404A
Cooling type:Air coog
NOTE:
Ice storage room is optional according to customers' request with extra price.
Standard cooling type:water cooling(Equipped with water tower);Other brand compressor is available for choice with different price:Taiwan Hanbell/Fusheng screw compressor(more economical);Germany Blogs piston compressor   Â
Â
Work piece location:
Make decision of using half of work platform or the whole according to the size of processing work-pieces. Using the whole platform, the work-piece should be put on the processing position close to the clamping cylinder locating side, step two pedal switches, clamp the work-piece and start processing. Using half of work platform, the work-piece should be put on the front or back processing position close to the clamping cylinder locating side, step the corresponding pedal switch and start processing.
Rotating speed setting:
Rolling speed can be set according to diameter of dill and other relevant information. The speed of this machine has been set. There is no need for users to adjust. Users only need to input the diameter of drill bit and it will adjust suitable speed automatically.
Feeding speed setting:
Feeding speed can be set according to drilling manual or experiences. The speed of this machine has been set according to the diameter of drill bit. Users can adjust it flexibly according to the actual use. For specific adjustment method, please refer to computer programming instruction.
Self-running operation:
When all factors meet the condition which self-running need, the "Ready" indicator light on. Put "start" button, the machine will run automatically and process work-pieces meeting requirement.
Notice:
This machine has two platforms. When one is processing, the other can move to the frame head for mounting and dismounting. The clamping and loosing of work-pieces is controlled by pedal switch.
Installation:
The seller shall send one engineer to the buyer's country for installation, commissioning and training. The buyer is responsible to provide all necessary equipments for handling and lifting the machine parts before seller's engineers go to the buyer's plant. In addition, the buyer should provide workers to support in installation activities, under supervision from the seller's engineers.
Commission:
The Supplier should give drawings and other details of material/preparation required for installation of machinery which the buyer has to prepare and keep ready before the machine arrives at the buyer's factory. Installation and commissioning can be finished within 5-10 days for above machine generally.
Training:
Training will include training on computer programming, machine operation and troubleshooting. The training time is at most 5 days for this machine.
The buyer should arrange no less than two people for accepting training. After training, the buyer should sign the "Receiving & Inspection Report" supplied by the seller to demonstrate the successful finish of commissioning and acceptance of the buyer.
Our Company
Factory:
With the development of SUNRISE, now our company has occupied important position in this industry. Due to the orders and sales performance is continuously improving, in order to better development, to meet customer's demand, and to provide customers high-quality equipment with the shortest time, our company have bought the new site, the area about 50,000 square meters, this will make sufficient preparation for development of our company and every customer.
Workshop:
Quality make brand, honesty win market, harmony converge talents, and innovation promote development. Our ability to consistently provide innovative, high quality products that outlast and outperform the competition, is why we are the one of the most successful companies offering the most advanced and productive solutions in the CNC machine industry.
Warehouse:
Manufacturing customer oriented products has always been our supreme concern. We believe that quality is the soul of an enterprise forever. Therefore, we never compromised with the quality of our products. We adopt advanced, scientific modern management ideas and system to realize supervisory control among all aspects of produce, inspection, sale and service etc., which help control quality, increase work efficiency and guarantee products' stability, reliability and precision. Therefore, the enterprise can achieve rapid and sustainable development.
Team:
We are a team of experienced and dynamic professionals who are experts in handling precision work through scientific processes. The professional excellent talents unite a powerful and creative team of design, research and development, which build our solid technical strength and competitiveness. And our company is developing fast and supply specialized service to all customers.
Professional Manufacturer Flake Ice Maker Machine for China
Model NO.: 10T/24h
Ice Shape: Flake Ice
Application Fields: Food Processing
Certification: ISO, CE, CCC
Condition: New
Material: 304 Stainless Steel Outer Plate
Refrigerating System: Brand Compressor Unit
Trademark: FST
Transport Package: Sea Worthy Packing
Specification: CE ISO9001
Origin: Tianjin China
Model NO.: 10T/24h
Ice Shape: Flake Ice
Application Fields: Food Processing
Certification: ISO, CE, CCC
Condition: New
Material: 304 Stainless Steel Outer Plate
Refrigerating System: Brand Compressor Unit
Trademark: FST
Transport Package: Sea Worthy Packing
Specification: CE ISO9001
Origin: Tianjin China
Higher refrigeration efficiency and lower loss of refrigeration capacity