-70 degree high and low temperature test box refrigeration principle High and low temperature test chamber is a kind of simulated environmental test equipment integrating high temperature test, low temperature test and high and low temperature cycle test. The conventional temperature range is 0°C～+150°C -20°C～+150°C -40°C～+150 °C -70 °C ~ +150 °C, the most complex of which is -70 °C ~ +150 °C. -70 degree high and low temperature test chambers mostly use cascade refrigeration, which is divided into high temperature part and low temperature part. High temperature part adopts R404A or R507A medium temperature refrigerant, while low temperature part uses R23A as low temperature refrigerant, high temperature part and low temperature part. Two completely independent refrigeration systems, but they are closely linked to each other. As shown in the figure below, when the user sets the temperature of the high and low temperature chamber to -70 degrees, the controller will output a command to the contactor to start the compressor of the R404A system. The compressor discharges the high temperature and high pressure gas through the condenser and the dry filter. The equipment such as the sleeving and the yarn tube eventually enters the evaporative condenser, which is also known as the plate heat exchanger; it prepares for starting the R23 cooling and finally returns to the low-temperature part R404A compressor, and so on. After a few minutes of normal operation of the R404 system, the compressor of the R23 system is started. The compressor discharges the high-temperature and high-pressure gas through the evaporative condenser, that is, the plate heat exchanger. The capillary throttling reduces the pressure to form a low-temperature and low-pressure liquid refrigerant, and finally enters the working chamber. Inside the evaporator installed in the box, the principle of circulation heat absorption and circulation motor continuously force the air flow in the studio to take away the heat from the studio to achieve the purpose of cooling. The last point to focus on is the evaporative condenser, which acts as both an evaporator for the primary R404 system and a condenser for the secondary R23 system. It belongs to a comparative core in the refrigeration system of the -70 degree cryogenic chamber. Accessories. -70 degree high and low temperature test box refrigeration schematic New Co2 laser engraving and cutting machine. The machine is a kind of Laser Engraving Machine System equipped with CO2 laser Tube, it is used to engrave on wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass and etc. It is most suitable and the preferred choice of equipments in industries such as advertisement, gifts, shoes,toys and etc. It supports multiple graphic formats, such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI and so on.
This machine is equipped with DSP Control System for RDdraw directly,also supports CoreDraw and Auto CAD and other advance software. It must connect with computer with USB cable when you change the settings of machine for the design files,you can transfer the file with USB memory stick to the machine, or can download it to the machine directly with USB cable from computer. Even on the same Job, you can do setting with different colour in the software and also can making holes.And it can the legs separate from the main body of the machine. The machine has doors which can be opened to accommodate larger materials.
It adopts self-developed Co2 laser and has strong cutting ability and efficiency. It integrates laser cutting, It is a high-end high-tech Co2 laser cutting machine integrating advanced technologies such as precision machinery and numerical control technology.
CNC Co2 laser cutting machine is the first choice in the non-metal material processing industry, with strong cutting ability "General" cutting speed, ultra-high stability, high-quality processing, extremely low operating cost and ultra-high adaptability.
Hot sale CO2 laser machine,Co2 Laser Cutting Engraving Machine,Mini 50W Co2 Laser Engraving Machine,Wood Laser Engraving Machine Zhongcan Technology Co.,Ltd , https://www.zhongcantechcn.com
Why do you say that the most complicated is -70 °C ~ +150 °C this temperature range, first of all do not say high temperature 150 degrees, because the relatively high temperature is relatively easy to control the low temperature, popular point is that there is no technical content; mainly talk about low temperature, remove the cooling rate In this regard, a low temperature of 0°C to -40°C is normally satisfied by a single compressor, which is the so-called single-stage refrigeration. When a low temperature of -70°C is used, two compressors must be used at the same time to satisfy the requirement. Cascading refrigeration. 