The most basic use of tankers is that our driver's friends have to understand but are the most frequent operations. In order to ensure and ensure safety, operators of oil tanker drivers must do “ six things †: (1) Pay attention to the tanker operation. When receiving the notice of receiving and paying oil, it is necessary to know in detail the type of oil and oil received, the tank number, the amount of oil, the direction of arrival or departure, and the time and record. When other positions are required to cooperate with the company's pump personnel, they should be notified at the same time and make appropriate preparations. (2) Pay attention to the tanker flow. There are automatic control system requirements for indoor display and on-site comparison; no automatic control system requirements to achieve " three controls " that is the process board, listing number, site, to ensure that the process is accurate. After closing and paying operations, close the valve of the tanker in time. (3) Check the quality of the tanker . Seriously check whether the water content of the pay and oil collection tank, the oil amount, the state of the equipment and the medium in the pipeline, the quality analysis, etc. are in compliance with the transmission and transfer conditions. (4) Check the equipment. Compare the control system (or process board) flow to check whether the oil tanks, valves, pipelines and other equipment of this operation are in good condition, and whether the heavy and crude oil lines are operating normally. (5) The tank car dynamic attention to master. After opening the pump (or opening the valve), check whether the receipt and payment of the oil is normal. In the process of transmission, it is necessary to keep abreast of the dynamics of oil products in this process and find problems in a timely manner. Oil tanker tanks must not exceed the safe height, and oil should not be less than the allowable minimum level. When the tanker is about to fill up, take the initiative to contact the other party and dispatch when it is empty. (6) Accuracy of tanker measurement. Before and after the transmission and transmission, accurate and timely measurement must be made, and the amount of check should be actively checked with the other party. If there is any abnormality, it shall be promptly identified. Aerial work platform is a product that serves various industries in aerial work, equipment installation, maintenance and other mobile aerial work. Aerial Work Platform,Aerial Lifts,Mobile Elevating Working Platform,Aerial Lift Supplier,Safety Aerial Working Platform Eurocrane (China) Co., Ltd. , https://www.overhead-crane.com
The products related to aerial work platforms mainly include: scissors type aerial work platforms, trailer type aerial work platforms, curved arm aerial work platforms, straight arm aerial work platforms, aluminum alloy aerial work platforms, sleeve type aerial work platforms and spider type aerial work platforms.