Fuel Pump,Mechanical Fuel Pump,Fuel Injection Pump,High Pressure Fuel Pump NCP AUTO PARTS CO.,LTD , https://www.nachuanfuelpump.com
  It's important that you are happy with our products and services!
Introduction:
The Vortex Flowmeter sensor can be used to detect and measure the flow of all kinds of gas, fluid and steam.
Technical Parameters:
Measured medium: All kinds of gas, fluid and steam
Nominal diameter: 25-500mm (Integrated-type) 300-2200mm (Insertion type)
Operating environment:
Environment temperature: -20° C-60° C
Liquid temperature: -40° C -250° C (Max 350° C)
Relative humidity: 5%~90%
Nominal Pressure: 1.6Mpa 2.5Mpa 4.0Mpa
Measurement Range: Gas and steam: (5-70)m/s fluid: (0.5-7) m/s
Measurement Accuracy: ± 1% ± 1.5%
Output Signal: (4-20mA)+Pulse
Safety Protection: IP65
Explosion-proof level: Exd II CT1-6
Power Supply: DC24V
Vortex Flow Meter Main Technical ParametersÂ
Fluid
Gas, Stream
Liquid
Accuracy
±1.5%
±1.0%
Repeatability
±0.5%
±0.33%
Reynolds Number
2*10 4 ~7*10 6
MediumÂ
TemperatureStandard
-40~250°C
Extension
-40~350°C
Range Ability
10:1
Diameter(mm)
DN25~DN500
PressureÂ
1.6Mpa/2.5Mpa/4.0Mpa/Others
Range of Velocity
5~70m/s
0.5~7m/s
Flange Material
Carbon steel, 304L, 316L
Bolt Material
Carbon steel
Detector
316L
Connecting Rod
304L
Radiator
Aluminum alloy
Mounting
Wafer/Flange
Protection Level
IP65/IP67/IP68
Power
24VDC(18VDC~30VDC)
Signal output
4-20mA/pulse
Communication
HART/Modbus/Profibus
Electrical Connections
2×M20*1.5
Explosion proof
Explosion proof
Construction
Integrated type/Divided type
Company Introduction:
Established in 2007, SINIER have more than 90 employees with the total registered capital of 15 millions Yuan,covering 20000 square meters area, which is company property.It is the only company that has the largest and most advanced liquid and gas calibration device equipment .
Product Range:
Workshop Corner:
Product Testing:
Calibration Devices:
FAQ:
1. Q: Are you a trading company?
A: No, we are a company with industry .
2. Q: Where is your company located? Â
A: We are located in No.6 Xinggu Road, Jiangning Development Zone, Nanjing, China.
3. Q:Â Â How do you control the quality?
  A: We ensure that all of our product are produced under ISO9001 quality system, and each product will be inspected and tested by our technicians before shipment. Â
Water Electromagnetic Flow Meter, Turbine Water Flow Meter and Steam, Air Mass Vortex Flow Meter
Water Electromagnetic Flow Meter, Turbine Water Flow Meter and steam,air mass Vortex Flow Meter
---Your Leading Process Control and Measuring Instrumentations Supplier in China
The series of Vortex Flowmeter is based on Carmen Vortex Principle, which adopts piezoelectric crystal as testing components. It is a new kind of stress detecting vortex flowmeter. It has the advantages of wide range rate, high accuracy, low pressure loss, good medium generality, pulse signal output proportional to flow, convenient to connect with computer etc. The detector probe of sensor and the vortex generating body are installed separately, and the high temperature resistant piezoelectric crystal doesn't contact with medium, so the instrument is simple structure, good generality, and high stability.