Single Screw and Barrel for Film Extruder

  • Model NO.: Dia15-300mm
  • Nitrided Layer Depth: 0.5-0.8mm
  • Nitrided Brittleness: Less Than Grade 1
  • Linearity of Screw: 0.015mm
  • Specification: ISO9001: 2008
  • HS Code: 84779000
  • Screw Barrel: Single Screw and Barrel
  • Nitrided Hardness: 900-1000hv
  • Surface Roughness: Ra0.4
  • Trademark: ZHONGYANG
  • Origin: Zhejiang of China
Single Screw and Barrel for Film Extruder

Specification:
Screw Diameter: Φ 15- Φ 300
L/D ratio: 15-46

Product classification:
Aiming at different plastic products the screw can be chosen from: General type, pin type, barrier type, separation type, and gas-exhausting type, etc.

Technical Information

Base Materials:
1). 38CrMoAlA(JIS SACM645).
2). 42CrMo(AISI 4140).
3). 4Cr5MoSi V1 (JIS SKD-61).
4). 9Cr18MOV
5). HPT

Bimetallic alloy materials:
1). Fe-based alloy
2). Ni-based alloy/Deloro alloy
3). Co-based alloy
4). NiCo-based alloy
5). Tungsten carbide/Wolfram carbide

Technics:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy welding
Bimetallic alloy centrifugal casting

Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Hard-chrome plating hardness after nitriding: >=950HV
Chrome-plating layer depth: 0.025-0.085mm
Bimetallic layer depth: 3mm

Warranty and service: 1 year

EGR Components

ZHEJIANG J.B AUTO PARTS CO., LTD. , https://www.jbcastings.com