CAN transceiver is a bridge connecting CAN control system and CAN bus network. What parameters should be paid attention to when selecting CAN transceiver? This article will give you an in-depth understanding of each parameter of the transceiver and its significance in practical applications.
Input characteristics
For isolated CAN transceivers, the input primarily refers to the input characteristics of the side connected to the CAN controller, including the power input and signal input.
According to the CAN interface voltage of the controller, the CAN module with 3.3V or 5V power supply can be selected. The normal input range of the isolated CAN module is VCC±5%. The main consideration is that the CAN bus level can be kept within the typical value range, and also the secondary The CAN chip operates near the nominal supply voltage.
For a separate CAN transceiver chip, the VIO pin of the chip needs to be connected to the same reference voltage as the TXD signal level to match the signal level. If there is no VIO pin, the signal level should be kept consistent with VCC. When using the CTM series of isolated transceivers, the signal level of the matching TXD needs to match the supply voltage, ie 3.3V standard CAN controller interface or 5V standard CAN controller interface.
2. Transmission characteristics
The transmission characteristics of the CAN transceiver are mainly three parameters: transmission delay, reception delay, and cyclic delay.
When choosing a CAN transceiver, we think that the smaller the delay parameter, the better, but what are the benefits of small transmission delay? What factors limit the transmission delay of the CAN network?
Figure 1 CAN transceiver delay characteristics
In the CAN protocol, the RXD is also monitoring the bus status while the transmitting node is transmitting data through the TXD. If the RXD monitor bit does not match the send bit, the node detects a bit error. If the monitoring in the arbitration field does not match the actual transmission, the node stops transmitting, that is, multiple nodes on the bus simultaneously transmit data, and the node does not obtain the data transmission priority. Also in the data checksum ACK response bit, RXD is required to acquire the data state of the bus in real time. For example, in normal network communication, the node is abnormal. In order to receive the ACK response reliably, it is necessary to ensure that the ACK bit is transmitted to the RXD register of the controller within a certain period of time. Otherwise, the sending node will detect a response error. The sampling position is set to 70% at 1 Mbps. Then, from the TXD transmission, when the RXD receives the ACK bit, the controller will sample at the 70% time point of the start of the ACK bit time, that is, the cyclic delay of the entire CAN network is less than 700 ns. In isolated CAN networks, this parameter is primarily determined by the isolator delay, CAN driver delay, and cable length. Therefore, a small delay time contributes to reliable sampling of the ACK bits, increasing the bus length. Figure 2 shows the ACK response for communication between two nodes using the CTM1051KAT transceiver. The typical delay time inherent in a transceiver is approximately 120 ns.
Figure 2 CAN network ACK response
3. Bus level
In the high-speed CAN network specified in ISO11898-2, we usually care about the amplitude of the differential signal, which is the key to bus data transmission. At present, there are a few CAN transceiver chips that support 3.3V power supply, which can be directly applied to the 3.3V control system. Due to the structural characteristics of the CAN transceiver, the CANH and CANL levels are related to the power supply. Although the differential values ​​of the CAN transceiver output of the 5V and 3.3V operating voltages are the same, the amplitude of the 3.3V transceiver CANH and CANL relative to the reference GND. The value is low, about 2V, such as TI's TCAN334. Using these two different transceiver networks, a single twisted pair or shielded twisted pair single point grounding is fully functional. If a double-shielded twisted pair cable is used, since CANH, CANL, and GND are all signal connections, communication errors may occur due to different bus voltages of the two transceivers. Therefore, the actual use should avoid direct connection of its GND.
Figure 3 transceiver bus level
4. Explicit timeout
The increase in dominant timeout is mainly to prevent the TX bus network from being in the "0" state for a long time due to hardware or software failure. Keeping TXD at "0" means that the CAN network is dominant, and all nodes of the entire network cannot send and receive data, that is, the bus is in a 瘫痪 state. The dominant timeout can be avoided by the hardware timing of the transceiver. As shown in Figure 4, Tdom is the dominant timeout period. The transceiver starts timing every time TXD is "0". When the Tdom is exceeded, the transceiver releases the bus internally, and the bus state is at a recessive level. The dominant timeouts of different transceivers are different. The actual application needs to consider the influence of the explicit timeout on the minimum baud rate of the bus. The CAN protocol stipulates that the error frame can have up to 11 consecutive dominant bits. To avoid the dominant timeout, it can calculate the lowest baud rate actually used according to the minimum dominant timeout of the transceiver. BPSMin = 11/Tdom_min. If the dominant timeout of the CTM1051Q is 0.3ms, the minimum baud rate is calculated to be 11/0.3=36.67kbps.
Figure 4 explicit timeout timing
5. Sleep wake up
ISO11898-5 shows a high-speed CAN bus unit in low-power mode. The CAN transceiver can be in sleep mode to reduce power consumption and wake up the transceiver with a certain bus timing. Figure 5 shows the wake-up timing diagram of CTM1044KAT. In the sleep state, when the length of the bus is longer than the three dominant, recessive, and dominant levels of TWK, the transceiver in the sleep state is awakened, any encountered in the middle. Interference signal levels less than TWK will be filtered by hardware. TWK is defined to enable the transceiver to receive wake-up signals only safely and reliably, avoiding false triggers due to bus interference. After receiving the RXD signal, the CAN controller can trigger the wake-up controller through software setting to further set the module STB pin to enter the normal working mode. In this awake mode, when all nodes of the bus are in a sleep state, all nodes will be woken up as long as a node on the bus signals.
Figure 5 sleep wake-up sequence
6. Summary
The selection of CAN transceivers has a lot of knowledge, which is related to the stability and reliability of the overall CAN network. To ensure the stability and reliability of the networking network, you can choose the current mainstream fully isolated CAN transceiver module. Zhiyuan Electronics released the first isolated CAN/RS-485 transceiver in China in 2003, and has accumulated bus isolation technology for nearly 20 years. At present, CTM series isolated CAN transceivers cover all CAN-bus communication protocols such as CAN2.0A, CAN2.0B, fault-tolerant CAN and CAN FD, and the transmission rate supports up to 1Mbps. It is the leading brand of isolated CAN transceiver industry in China. Zhiyuan Electronic Isolation Transceiver has built-in complete isolated DC-DC circuit, signal isolation circuit, CAN bus transceiver circuit and bus protection circuit. It has higher integration and reliability and is suitable for occasions requiring high stability bus communication. Help users improve the level of bus communication protection.
Brown Kraft Paper Open-Window Bag
1.Material:this type of paper bag is made out of 100% natural virgin wood pulp or
recycled paper,which has no pungent odor. The raw materials which are selected
carefully and imported from USA will be dealt with special process.The imported
original wood pulp with 450 ° c high temperature sterilization is not easy to
break and tear up.All the paper we used to manufacture the paper bag is not
only super durable and reinforcement but also ECO friendly ,biodegradable,compostable
environmental-friendly,natural friendly and PLA recyclable Owing to this good
quality materials.We have very high standards on controlling raw materials.So
that the supporting weight of our paper bag holds up to higher than those at
the market. Reuse the paper bags
as many times as you like and recycle them when you are done for a greener
Earth! We offer a wide variety of material and color option to meet your
requirements.we also supply PE coated,poly or aluminum laminatived or double
glud lining inner paper,which is water proof,oil proof,grease proof,moisture
resistance,weather proof,anti-slip anti-skid,etc.
2.Size:Multi customized sizes are available,we accept personalized
sizes.Different sizes including small,medium and large measurement which are
suitable for different usages.It`s versatile.we category for kinds of
industrial usage.
3.Handles:One reasons
of this type of paper bag of excellent quality is for seeking a more luxurious
handle solution all the paper bags handles are produced by fully automatic machines.
Sturdy round twisted,flat,die cut,holes,eyelet,patch,cotton robbin,grosgrain
rope,PP rope handles of paper bags are made of 100% cellulose and fiber .They
do not come out with an ease even you pull them with hard force.These handles
are adhered with good quality super glue by fully automatic machines
instead of handmade.which looks more elegant,clear,beautiful,sanitary,flat,reinforcement
than handmade.So that it creats a smooth,elegant finish for the bags.No stray glue any where like other paper
bags do.it's more convenient and make purchase easy to carry,take
away,to go etc.
4.Bottom: Reinforcement
flat ,square rectangle,block bottom is easy to stand up ,which is neat and flat
without glue outside.We deal with the bottom carefully in order not to break
easily.You don't need to worry about stuff fall down from the paper bag and
make a trouble mess.A good quality bottom will be more useful and helpful which
is also made by fully automatic machines.It is not only solid but also
strong enough to support heavy duty weight.It can take whatever the light or
heavy stuff inside the paper bag.They are not only durable and convenient but
also environmental friendly compostable and recyclable.
5.Printing:We have the best advanced
technology fully automatic printing machines which can support up to 8 colours
printing.We accept customer designs and logos.Gravure printing,embossing
printing,debossing printing,hot stamping,screen printing,UV printing,offset printing,flexo
printing with CMYK pantone non-toxic water based ink are all available. Our
printing has a pretty good quality as the printing of the designs is not only
more durable,sun proof,weather proof but also beautiful and bright,which absorbs ink well and is
stable not easy to tide the color.We aslo supply plainpaper bag, which are perfect for craft and DIY.
Printed and embellished as you may wish. Personalize the bags to make them
uniquely yours. Print your own business logo and use them as retail carry bags.
6.Surface handling:we supply glossy and matte surface dealing.This all depends on
customer`s requirements.Whatever the glossy or matte surface makes the bag more
luxurous.
7.Appication: paper bags with kinds of
hanles are perfect for packing shoes,clothing, wine, gifts,etc.They are great suitable
for any occations and affordable for small to medium businesses, parties &
events, wedding reception and start-up business.
8.Quatity inspection systerm : One of the reasons for our good Quality is that inspection system is
best of its kind. We're proud of our quality control system. Our standards are
very high. we put great stress on quality of products.Almost every process is
computerized.. All products have to pass strict inspection before they go out.
I believe the quality is soul of an enterprise. So we won't sacrifice the
quality for quick profit.All of our products are suitable for the world market.
Our products has always come up to international standards. We have trained analysts
to do quality analysis of each process when we make the product.We also provide
quality analysis training as part of training for new workers plus a week of
futher training every year. So our products are well known for their fine
quality. All the paper bag are received a warm welcome in the world market wherever
they go.Our clients are all satisfied with them.
9.Sample:We offer free samples between
three and five days, but excluding complicate condition upon customer`s
requirnments.For instance, we charge you like 50 dollars for samples,but we
will refund you after placing an order.The expenses of samples delivery can be
nagotiated.
10.Our
factory: Jinan
Xin Shun Yuan Packing Co., Ltd is located in Ningjiabu Industrial Park,Zhangqiu
district, Jinan city, Shandong province, China.It originated in Shandong
Printing Factory (founded in 1994).It is professional manufacture of new
environmental-friendly packing bag based printing processing enterprise with
more than 12 years of experience in production and management.Recent years, our
scale is expanding. Covering an area of about 2 million square meters. And also
expand our equipment, like unit type flexo printing machines, satellite adagio
printing machines, lamination type flexo printing machines, gravureprinting ,
dry laminating machines, automatic square bottom paper bag machines, food paper
bag machines, automatic control stick bag machines, trilateral, edges the
closure, self-reliance paper bag machines, CNC cutting machines.We have 8 sets
flexo printing machines, 1 set Gravure printing machine;12 sets Paper bag
machines ; 5 sets cutting machines, tin tie machines;30 sets heat sealing
machines ; 3 sets glue coating machines , etc. We have150 staff menbers,18
management staff ,12 salesmen and 120 workers. We have ISO9001, FSC certificates.
11.Packing & Shipment:Standard export packing, 250PCS
or 500PCS each carton. We try our best to make sure the packing is
seaworth and strong enough to stand the rough handling in a long distance
shipment .In order to ensure the packing is moisture resistance,water
proof,weather proof etc.The packing corrugated cartons therefore are lined with
plastic bag from inside and strengthened double solid plastic straps.We have
rich experience on packing.We normally do not only provide air transportment
and sea transportment but also multi modal combined transportments,which is up
to customer`s requirements.
12.Payment methord: L/C,D/A,D/P,T/T,Western
Union,MoneyGram Paypal payments.
13.Our service:we are in 24/7 service,we are responsibilable for replacing the defect
products.Feel free to talk to us.