Phone case printer, also called uv led flatbed printer/UV Printer, belongs to Sapphire-Jet which is a multi functional LED UV Flatbed Printer that created by Shenzhen refinecolor technology co.,ltd. Phone case printer Printing on Glass Ceramic was built with industrial configuration as thicken aluminum profile, water cyculation cooling system, automatic detect UV Curing system... 6 color and max. 2880 dpi printing resolution. Can print on bend, cylinder objects, balls and bottles. Output with good 3D texture printing result.
Our phone case printer often using for phone case printing, It is easy for
customizing printing and you can print any image in your computer with
our printer.Customers can print their own photos, design and more from
the photoshop or coreldraw software.
Phone Case Printer,Phone Case Digital Printer,Cell Phone Case Printer,Mobile Phone Case Printer,Phone Cell Printer Shenzhen Refinecolor Technology Co., LTD. , https://www.szcoffeeprinter.com
　　
If the pump shaft cracks or heavy wear on the surface, when the centrifugal pump shaft strength should be replaced when the new shaft. If the pump shaft slightly bent or slightly worn, hooks, etc., should be repaired. So, what are the repair methods of the pump shaft?
　　
1, shaft hook and wear repair
　　
The use of sliding bearing shaft journal, due to poor lubrication or lubricating oil into the iron, sand and so make the pump shaft journal abrasion or grinding out the groove marks, rubber bearings at the journal wear, etc., generally used in plating , Copper, plated stainless steel for repair, and then processed into a standard diameter by car or mill method.
　　
2, repair the pump shaft bending
　　
On the smaller diameter of the shaft can be padded in the bending copper, with a hand hammer beating straightening; on the larger diameter, not serious bending axis can be calibrated with a screw calibrator.
　　
3, the shaft thread repair
　　
Pump shaft end of the thread damage can be used when the mild file damage thread file repair and continue to use. If the damage is serious, first pump the small end of the car, and then pressure on a bushing, bushing on the car out of thread; also available electricity, gas welding in the pump shaft thread surfacing, and then turning the thread.
　　
4, keyway repair
　　
If the keyway surface is rough, and damage is not serious, the file can be repaired light. If the damage is heavy, the old tank can be repaired, another open new slot elsewhere, but the transmission shaft of larger power must be replaced with a new shaft.
Products name
Double XP600 Heads A3 Plus varnish Phone Case Printer A3 plus With Faster Speed
Model
RF-ZZ1/ZZ2
UV lamp cooling system
Cycle water & air cooling + Heat sink
Printer head Protection
Intelligent Self Protect System
Printer Head
Double Printhead with XP600 (We also offer single printer)
12 color printer(Ink support)
UV ink : CMYK+ 2gloss oil + 6 W
Ink system
Continue ink supply system with damper cartridge
Print Speed
8 pass, 70s/A4 full size
Max Resolution
16 pass
Max Printing Size
330mm*600mm
Print Thickness
0-200mm
Printer Size/packing size
770mm*720mm*600mm / 98*83*78cm
Net/Gross/Volume weight
52.5KG/88.5KG
UV lamp Temperature
60 degree(UV lamp surface)
40 degree (1cm far from lamp surface)
Onekey to print aotumatically
Yes
Ink pump Automatically
Yes
Computer system
Windows system, Gigabit net, network adapter contain below character: Gigabit,GBE,10/100/1000M,RTL8169
Standard Enclosure
Software 1 set, power line 1 set, Network line 1set, guidebook 1 set
Brief introduction to the method of damage repair of water pump shaft
Pump Shaft Bearing Conventional shaft bearings are made of high carbon chromium bearing steel (GCr15) for use with steels (including shafts, outer rings, and ball bearings). Because the high-quality bearing steel smelting through vacuum deoxidation, electromagnetic stirring, less oxide content, can withstand greater contact stress at the same time can withstand large high tensile stress, through the heat treatment, the shaft hardness For 58-62HRC. At the ring raceway hardness of 60-64HRC, ball and roller hardness of 61-65HRC.