The Xunda T600 is a cold applied coating system designed for the corrosion protection water, oil gas underground or aboveground pipelines ,electrolysis on below grade metal substrate and waterproofing for the basement, roof ,bridge etc. The T600 consists of a polyethylene and PVC backing laminated with rubberized bitumen .
Xunda liquid adhesive can be used as primers for this system. It provides a strong cohesive bond to the primed steel surface.
The system can be applied by hand or with a wrapping machine.
polyethylene joint wrap tape Jining Xunda Pipe Coating Material Co.,Ltd , https://www.alta-altene.com
General Information:
The shredding machine is a general-purpose shredder developed and developed by our factory. It can effectively tear up most materials. Low energy consumption, high output, easy to move and so on. Users can choose different models according to the size of the material and the amount of processing required to achieve the purpose of "limited resources, unlimited recovery". This series of shredders can generally be used to shatter broken plastics, rubber, tires, nylon plastics, car bumpers, abandoned fishing nets, plastic pipes, fibers, paper, electrical components, cables, circuit boards, and wood.
Features:
1. Single shaft shredder has characters as follows: single shaft shredder properties as follows: strong, durable. It is suitable to recycle a variety of bulk solid materials, refractory materials, plastic containers and plastic barrels, plastic films, fibers, paper. Shredded particles can be small to 20mm according to different needs. We can provide all kinds of feed hopper; low speed rotary cutter in accordance with customer needs, which will be low noisy and energy saving.
2. Single shaft shredder consists of a knife disc and a static knife to complete shredding material. Cutter is composed of a base shaft and several shapes quadrilateral knife block. The knife block has 4 blades, can be replacing the use of. The knife block along the axis of the base is in multiple rows into type V, and fixed with screws in the radical axis, rotated with the based shaft together, finally comprise a knife disc. The two-static knife is fixed on the machine frame. The material is sent to the cutter by the horizontal hydraulic cylinder. The speed is stable and adjustable, and the propulsive force is large and uniform. It is applicable to the recovery of a variety of bulk solid materials, refractory materials, irregular plastic containers and plastic barrels, tubes, films, fibers, paper etc. Spindle speed is 45 ~ 100 rpm/min.
3. We can offer a variety of rotor configurations to suit different applications. Such as:High Performance Rotor,Hard Material Rotor and Soft and Film Rotor.
4. When customers choose the rotor, we can also offer different knives holder to suit different requirement. Such as: Welded Knife holders,Assembled Knife holders and CNC cutting knife holders.
Machine models:
Model
CBS-600
CBS-700
CBS-800
CBS-1000
CBS-1200
CBS-1500
Motor power
22/30kw
37kw
45kw
55kw
75kw
90/110kw
Rotating blade quantity
26+4pcs
30+4pcs
36+6pcs
48+6pcs
58pcs
98pcs
Fixed blade quantity
4pcs
4pcs
4pcs
4pcs
4pcs
6pcs
Blade material
      Cr12MoV/SKD-11/D2
Cr12MoV/SKD-11/D2
Cr12MoV/SKD-11/D2
Cr12MoV/SKD-11/D2
Cr12MoV/SKD-11/D2
Cr12MoV/SKD-11/D2
Rotating speed
75rpm
75rpm
75rpm
75rpm
80rpm
80rpm
Rotating diameter
260mm
280mm
400mm
400mm
400mm
550mm
Shredding room dimension
600*600mm
700*600mm
800*800mm
1000*1000mm
1200*1200mm
1500*1500mm
7.5kwHydraulic p1500ower
2.2kw
2.2kw
3kw
4kw
5.5kw
7.5kw
Cylinder movement length
600mm
600mm
800mm
1000mm
1200mm
1500mm
Overall dimension
1800*1600*1850
1830*1750*1850mm
2200*1780*2100mm
2500*1850*2300mm
3500*2000*2400mm
4800*2350*2400mm
Machine weight
2200kg
3000kg
3700kg
4500kg
7000kg
9200kg
APPLICATIONS:
Main shaft and final particle:
Machine models:
CONTACT INFORMATION:
Manager:Â BOSH LEUNG (MR.)Â
Tel/Fax:Â +86-512-58591481
Mobile:+8615262324740
Company website:Â http://www.conboplas.com
Address:Â Leyu Development Zone, Zhangjiagang city, Jiangsu Province, China.
SINGLE SHAFT SHREDDER:
General Information:
The shredding machine is a general-purpose shredder developed and developed by our factory. It can effectively tear up most materials. Low energy consumption, high output, easy to move and so on. Users can choose different models according to the size of the material and the amount of processing required to achieve the purpose of "limited resources, unlimited recovery". This series of shredders can generally be used to shatter broken plastics, rubber, tires, nylon plastics, car bumpers, abandoned fishing nets, plastic pipes, fibers, paper, electrical components, cables, circuit boards, and wood.
Features:
1. Single shaft shredder has characters as follows: single shaft shredder properties as follows: strong, durable. It is suitable to recycle a variety of bulk solid materials, refractory materials, plastic containers and plastic barrels, plastic films, fibers, paper. Shredded particles can be small to 20mm according to different needs. We can provide all kinds of feed hopper; low speed rotary cutter in accordance with customer needs, which will be low noisy and energy saving.
2. Single shaft shredder consists of a knife disc and a static knife to complete shredding material. Cutter is composed of a base shaft and several shapes quadrilateral knife block. The knife block has 4 blades, can be replacing the use of. The knife block along the axis of the base is in multiple rows into type V, and fixed with screws in the radical axis, rotated with the based shaft together, finally comprise a knife disc. The two-static knife is fixed on the machine frame. The material is sent to the cutter by the horizontal hydraulic cylinder. The speed is stable and adjustable, and the propulsive force is large and uniform. It is applicable to the recovery of a variety of bulk solid materials, refractory materials, irregular plastic containers and plastic barrels, tubes, films, fibers, paper etc. Spindle speed is 45 ~ 100 rpm/min.
3. We can offer a variety of rotor configurations to suit different applications. Such as:High Performance Rotor,Hard Material Rotor and Soft and Film Rotor.
4. When customers choose the rotor, we can also offer different knives holder to suit different requirement. Such as: Welded Knife holders,Assembled Knife holders and CNC cutting knife holders.
Machine models:
Model
CBS-600
CBS-700
CBS-800
CBS-1000
CBS-1200
CBS-1500
Motor power
22/30kw
37kw
45kw
55kw
75kw
90/110kw
Rotating blade quantity
26+4pcs
30+4pcs
36+6pcs
48+6pcs
58pcs
98pcs
Fixed blade quantity
4pcs
4pcs
4pcs
4pcs
4pcs
6pcs
Blade material
      Cr12MoV/SKD-11/D2
Cr12MoV/SKD-11/D2
Cr12MoV/SKD-11/D2
Cr12MoV/SKD-11/D2
Cr12MoV/SKD-11/D2
Cr12MoV/SKD-11/D2
Rotating speed
75rpm
75rpm
75rpm
75rpm
80rpm
80rpm
Rotating diameter
260mm
280mm
400mm
400mm
400mm
550mm
Shredding room dimension
600*600mm
700*600mm
800*800mm
1000*1000mm
1200*1200mm
1500*1500mm
7.5kwHydraulic p1500ower
2.2kw
2.2kw
3kw
4kw
5.5kw
7.5kw
Cylinder movement length
600mm
600mm
800mm
1000mm
1200mm
1500mm
Overall dimension
1800*1600*1850
1830*1750*1850mm
2200*1780*2100mm
2500*1850*2300mm
3500*2000*2400mm
4800*2350*2400mm
Machine weight
2200kg
3000kg
3700kg
4500kg
7000kg
9200kg
APPLICATIONS:
Main shaft and final particle:
Machine models:
CONTACT INFORMATION:
Manager:Â BOSH LEUNG (MR.)Â
Tel/Fax:Â +86-512-58591481
Mobile:+8615262324740
Company website:Â http://www.conboplas.com
Address:Â Leyu Development Zone, Zhangjiagang city, Jiangsu Province, China.
Plastic Recycling Machine/Plastic Granulator/Single-Shaft Shredder/Large Big Plastic Pipe Crusher
Computerized: Computerized
Certification: CE, ISO9001:2008
Blade Material: Cr12MOV/SKD-11/D2
Rotating Blade Quantity: Different as Different Machine Model
Fixed Blade Quantity: 4PCS
Rotating Speed: 75-80rpm
Rotating Diameter: 260mm-550mm
Motor Power: 22kw-110kw
Delivery Time: 30 Days
Guarantee Period: One Year
Electrical Components: Siemens, ABB, Schneider, Omron, etc.
Standard Particle Size: Around 60mm (Customized)
Trademark: CONBOPLAS
Transport Package: Plastic Film and Wooden Box
Specification: Max model at CBS-1500
Origin: Zhangjiagang
HS Code: 84772090
Computerized: Computerized
Certification: CE, ISO9001:2008
Blade Material: Cr12MOV/SKD-11/D2
Rotating Blade Quantity: Different as Different Machine Model
Fixed Blade Quantity: 4PCS
Rotating Speed: 75-80rpm
Rotating Diameter: 260mm-550mm
Motor Power: 22kw-110kw
Delivery Time: 30 Days
Guarantee Period: One Year
Electrical Components: Siemens, ABB, Schneider, Omron, etc.
Standard Particle Size: Around 60mm (Customized)
Trademark: CONBOPLAS
Transport Package: Plastic Film and Wooden Box
Specification: Max model at CBS-1500
Origin: Zhangjiagang
HS Code: 84772090
SINGLE SHAFT SHREDDER: