ANSI B16.5 150#/300# Carbon Steel/Stainless Steel/Alloy Steel Wn/So Flange

                        Alloy WN/SO flange ANSI B16.5 150#/300#

1.Material:
Carbon steel A105/Rst37.2/C22.8/Q235 Stainless steel  304/304L,316/316L,321,ect.

2.Size:1/2"-48"

3.Pressure:150lbs-2500lbs PN0.6-PN16.0

4.Facing:RF/RJ/ FF

5.Standard:ANSI(ASME)16.5 16.47/DIN/JIS/UNI/...

6.Flanges of welding neck, socket welding, threaded, blind, slip on, lap joint are in accordance with ANSI 16.5 from 1/2" to 24" and classes 150 to 2500 (complete range).

7. Production process : raw material--cutting--heating--forging--heat treatment--maching--inspection.-washing-ex-working.

8. Certificate :ISO9001-2008

9. Used for : linepipe, heat exchanger, petroleum,chemical,power,gas,water,shipbuilding,construction,etc.

10.Blind, slip on, welding neck flanges are from 6 Bar to 40 Bar in accordance with DIN.

11.Flanges from 1/2" to 48" and up to 450 lbs are in accordance with BS10 Table D & Table E, BS Table F & Table H, BS Table J & Table K.

12.Flanges from 2kg to 210 kg are in accordance with JIS.

13.Flanges according to API 605/ASME B16.5/ASME B16.47

14.Depending on special purposes, flanges can be manufactured in different shapes and sizes

15. Excellent and high quality control.

                        Alloy WN/SO flange ANSI B16.5 150#/300#

1.Material:
Carbon steel A105/Rst37.2/C22.8/Q235 Stainless steel  304/304L,316/316L,321,ect.

2.Size:1/2"-48"

3.Pressure:150lbs-2500lbs PN0.6-PN16.0

4.Facing:RF/RJ/ FF

5.Standard:ANSI(ASME)16.5 16.47/DIN/JIS/UNI/...

6.Flanges of welding neck, socket welding, threaded, blind, slip on, lap joint are in accordance with ANSI 16.5 from 1/2" to 24" and classes 150 to 2500 (complete range).

7. Production process : raw material--cutting--heating--forging--heat treatment--maching--inspection.-washing-ex-working.

8. Certificate :ISO9001-2008

9. Used for : linepipe, heat exchanger, petroleum,chemical,power,gas,water,shipbuilding,construction,etc.

10.Blind, slip on, welding neck flanges are from 6 Bar to 40 Bar in accordance with DIN.

11.Flanges from 1/2" to 48" and up to 450 lbs are in accordance with BS10 Table D & Table E, BS Table F & Table H, BS Table J & Table K.

12.Flanges from 2kg to 210 kg are in accordance with JIS.

13.Flanges according to API 605/ASME B16.5/ASME B16.47

14.Depending on special purposes, flanges can be manufactured in different shapes and sizes

15. Excellent and high quality control.

Pulse Deduster
The pulse precipitator is a new high efficiency pulse dust remover based on the MC-I type. It has the advantages of high purification efficiency, large gas handling capacity, stable performance, long life of filter bags, easy operation and low maintenance workload.
Product introduction
The pulse duster is a new type of high efficient pulse duster based on the Bag Filter . It combines the advantages of all kinds of pulse blowing duster in the split chamber. It overcomes the shortcomings of the low strength of the chamber and the uneven distribution of the air, and expands the application range.
The pulse Dust Collector is when the dust gas enters the dust collector from the inlet air inlet. First, it meets the inclined plate and baffle in the middle of the inlet and outlet. The air flow turns into the ash bucket. At the same time, the velocity of air flow slows down. Because of the inertia effect, the coarse particle dust in the gas is directly inflow into the ash bucket. With the effect of precollecting dust, the air flow into the ash bucket is later folded and the filter bag dust which is equipped with a metal skeleton is captured on the outer surface of the filter bag. The purified gas enters the cleaning room on the upper part of the filter bag and comes to the outlet. The dust gas is attached to the filter bag through the process of purifying the filter bag, and as the time increases. The dust on the filter bag is more and more, increasing the resistance of the filter bag, resulting in the gradual reduction of the air flow rate. It is the normal work to control the resistance in a certain range (140--170 millimeter water column). Once the range is beyond the range, the filter bag must be cleaned, and the pulse control valve is triggered in the order of pulse control to open the pulse valve and the pressure inside the air bag. The shrinkage air is sprayed into the corresponding filter bag by the Venturi Tube, and the filter bag expands rapidly at the moment, making the dust attached to the surface of the filter bag fall off, and the filter bag is restored to the initial state. The dust falls into the ash hopper and is discharged through the ash disposal system. Therefore, the dust deposited on the filter bag is periodically cleaned by impulse injection, so that the purified gas passes through normally and ensures the operation of the dust removal system.

Pulse Duster Series

Pulse Duster Series,Removable Deduster,Pulse Type Dust Collector,Pulse Deduster

Botou Youjian Environmental Protection Equipment Co. LTD. , http://www.btdustmachine.com